HOW TO CLEAN THERMAL PASTE OFF A CPU. PASTE OFF A CPU
How To Clean Thermal Paste Off A Cpu. Environmentally Friendly Cleaning Product.
How To Clean Thermal Paste Off A Cpu
- Thermal grease (also called thermal gel, thermal compound, thermal paste, heat paste, heat sink paste, heat transfer compound, or heat sink compound) is a fluid substance, originally with properties akin to grease, which increases the thermal conductivity of a thermal interface by compensating
- (How To’s) Multi-Speed Animations
- Providing detailed and practical advice
- A how-to or a how to is an informal, often short, description of how to accomplish some specific task. A how-to is usually meant to help non-experts, may leave out details that are only important to experts, and may also be greatly simplified from an overall discussion of the topic.
- Practical advice on a particular subject; that gives advice or instruction on a particular topic
- Make (something or someone) free of dirt, marks, or mess, esp. by washing, wiping, or brushing
- make clean by removing dirt, filth, or unwanted substances from; "Clean the stove!"; "The dentist cleaned my teeth"
- clean and jerk: a weightlift in which the barbell is lifted to shoulder height and then jerked overhead
- free from dirt or impurities; or having clean habits; "children with clean shining faces"; "clean white shirts"; "clean dishes"; "a spotlessly clean house"; "cats are clean animals"
- Remove the innards of (fish or poultry) prior to cooking
- central processing unit: (computer science) the part of a computer (a microprocessor chip) that does most of the data processing; "the CPU and the memory form the central part of a computer to which the peripherals are attached"
- Central processing unit
- Contracts & Purchasing Unit
- Central processing unit. The computer chip primarily responsible for executing instructions.
Replacing the thermal paste on my Playstation 3
What you're looking at is the logic board for a launch day 60 gig Playstation 3. What you're also looking at is poorly applied thermal paste that was no longer effective in keeping the system properly cooled. I'm remedying that situation.
Story: Over the last 5 months or so, I've noticed that my PS3 would go from near silence, to deafening fan noise about 7-10 minutes of turning it on. The final straw was when I was watching a DVD (we use the PS3 as our living room BluRay/DVD player), I could no longer hear any of the dialogue at normal listening levels over the fan noise.
So, as I am known to do, I started doing some research on the issue. What I found was forums full of people complaining of the exact same issue. Some people said that standing the system vertically would fix it (it didn't). Others claimed that elevating the console 5-6 inches off a flat surface was the solution (it wasn't). One person even said that turning off Wi-Fi and using wired ethernet would do the trick (this is silly). However, I did find one write-up that made perfect sense; in most cases, the thermal paste on launch PS3 systems was of very low quality, and was old enough that it probably needed to be replaced.
The symptoms they described were exactly the same as mine; went from being a fairly quiet system to being an unbearable wind tunnel in a very short period of time. Looking at the photos the person took to document the process, I could see for myself that this was easily the culprit. I've built and overclocked enough computers in my time to know a shitty thermal paste job when I see it. Convinced of what I found, I went to work.
After 30 minutes (I took my time) of disassembly, I found myself staring at the scene above. Yep; that is some horribly decayed and improperly applied thermal paste. The giant globs you see on the sides of the chip are just about the worst thing you can do, as it actually acts as a heat insulator rather than aiding in dissipation. After thoroughly cleaning off all the existing thermal paste, I replaced it with a perfectly applied amount on both the RSX chip and the Cell processor, pieced everything back together, and fired it up to test if my work had made a difference.
In short: yes, a dramatic and welcome difference.
Even after 30 minutes of playing a game, followed by another 15 of watching a DVD, the fan never went above the 'medium' setting, which translates into 'not very loud at all'.
So there you have it. If your old fatty PS3 seems to be noisier than it used to be, chances are, you need to replace the thermal paste.
Naked Radeon 4850
Biostar did quite a good job of putting thermal paste on, unlike BFG (Big F!@#ing Goop.) Still, there was room for a 3 degree improvement (Celsius, of course!)
Remember, less is more. And that's not what she said.
P.S. Yes, the card is balanced on the 120 mm side panel fan. Yes, I thought I killed the card. It artifacted for two days afterward. BUT GUESS WHAT? IT WORKS NOW, AND IT'S COOLER THAN BEFORE. AND IT'S OVERCLOCKED TO 740 MHz core/1189 MHz memory WITH NO VOLTAGE INCREASE (and I know I can go a bit further on the memory.) BITE ME.
laminate floor cleaning solution
how to clean gold ring
cleaning supplies pa
cleaning plastic blinds
cream on inside clean on the outside
boat cleaning equipment
sponge for cleaning
how do you clean silver jewelry
mold cleaning product